The speedheat MCD4 programmable thermostats are the latest in the linage of Danish 'OJ Microline' thermostats designed and manufactured in Denmark. The thermostats functionality is based on the existing, fully programmable features;
• 4 periods per day heating schedule.
• Weekday / Weekend differential schedule.
• Floor and Air sensor.
• 16A Switching capacity
• Temporary Manual override and Holiday power off settings.
• Monitoring power consumption and running costs as a percentage of time for previous days, month or year.
• Adaptable to colder mornings (the thermostat recognises the need to power heating earlier).
In addition, the new MCD4 boasts new features;
• The thinnest flush mounted thermostat
• A larger LCD, now with a backlit display
• The option to wall mount either horizontally or vertically
• Inbuilt ‘regulator mode’ (when the floor sensor is unavailable).
the Speedheat MCD4 programmable thermostats borrow from the popular ‘icon menus’ similar to ‘smartphone’ displays. The self-explanatory picture icon menus are a level of technology above the older alphanumeric digital displays.
Click here to view the MCD4-1999-SH Brochure (PDF)
This flush mounted, minimalist design has been by far the most popular in our range of thermostats. The tried and true Danish 'OJ Microline' engineering and design has seen its widespread use in commercial, residential and industrial applications.
The MCD2 has the following fully programmable features;
• 4 periods per day heating schedule.
• Weekday / Weekend differential schedule.
• Floor and Air sensor.
• 16A Switching capacity
• Temporary Manual override and Holiday power off settings.
• Monitoring power consumption and running costs as a percentage of time for previous days, month or year.
• Adaptable to colder mornings (the thermostat recognises the need to power heating earlier).
Click here to view the MCD2-1999-SH Brochure (PDF)
MTD2
The manual thermostat controls are idea for those that find programmable models too comprehensive and simply wish to turn the heating on and select a temperature to suit.
In keeping with the Danish 'OJ Microline' minimalist design, the MTD2 and MTC thermostats have an on/off button and up/down arrow temperature control.
Manual control thermostats can run off both the air temperture and floor temperature.
In addition, the MTD2 offers a technicians menu where the following settings can be altered;
• 16A Switching capacity
• Red LED to indicate heating system in 'on'
• Floor and Air sensor control, with option to heat according to Air sensor with floor probe limitation (ideal for timber floors where the floor finish cannot exceed a set temperature, yet the air temperature still requires heating)
• Night setback - ensure your tiles stay above a specified temperture overnight
• Regulator functionality - In the event the thermostat cannot receive an accurate floor or air sensor reading, the intermittantly 'regulate' power the heater as required.
Click here to view the MTD2-1999-SH Brochure (PDF)
The ETV DIN Rail mounted manual control Thermostat is suited for mounting at the switchboard. These thermostats are usually used to control floor heating for houses with smarthome automation systems such as CBUS and Dynalite.
The thermostat is normally mounted in the 'comms room', takes the temperature reading of the room from the floor sensor, and controls the temperature by dial selection. The home automation system will then control what times the floor heating heating is on.
• 16A Switching capacity
• Standardised switch board fitting
• Floor sensor control
